Weider Club C4800 User Manual download pdf (Page 18)

39. Wrap the Lower Short Stack Cable (64) around a

90mm Pulley (39). Attach the Pulley and a Short

Cable Trap (48) to the Base (1) with an M10 x

45mm Bolt (51). Make sure the Cable Trap is

oriented to hold the Cable in the groove of the

Pulley.

41. Locate the Weight Plate (20) that is attached

to the bottom of the Bottom Weight (21).

See the inset drawing. Attach the end of the

Lower Short Stack Cable (64) to the Weight Plate

(20) with an M10 x 45mm Bolt (51) and an M10

Nylon Locknut (101).

42. Identify the Leg Press Cable (65). Attach the

Cable to the Leg Press Base (3) with an M8 x

67mm Shoulder Bolt (90), two M8 Washers (100),

and an M8 Nylon Locknut (87).

43. Wrap the Leg Press Cable (65) around a 100mm

Pulley (38). Attach the Pulley and a Large Cable

Trap (68) to the Rear Press Arm (13) with an M10

x 92mm Bolt (55), an M10 Washer (99), and an

M10 Nylon Locknut (101). Make sure the Cable

Trap is oriented to hold the Cable in the

groove of the Pulley.

40. Wrap the Lower Short Stack Cable (64) under a

90mm Pulley (39). Attach the Pulley to the Base

(1) with an M10 x 45mm Bolt (51), an M10

Washer (99), and an M10 Nylon Locknut (101).

101

100

101

100

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 40 41

No comments

Weider Club C4800 User Manual Page 18