Weider Club C4800 User Manual download pdf (Page 25)

65. Attach the tether on a Butterfly Pin (78) to the

Butterfly Frame (10) with an M4 x 15mm Self-tap-

ping Screw (107).

Repeat this step with the other Butterfly Pin

(78).

66. Attach the Curl Pad (29) to the Curl Post (28) with

four M6 x 16mm Bolts (89).

67. Make sure that all parts have been properly tightened. The use of the remaining parts will be explained in

ADJUSTMENTS, beginning on the following page.

Before using the weight system, pull each cable a few times to be sure that the cables move smoothly over

the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If the

cables are not properly installed, they may be damaged when heavy weight is used. See the CABLE

DIAGRAMS on pages 29 and 30 of this manual for proper cable routing. If there is any slack in the

cables, you will need to remove the slack by tightening the cables. See TROUBLESHOOTING AND

MAINTENANCE on page 31.

107

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 40 41

No comments

Weider Club C4800 User Manual Page 25