Weider Club C4800 User Manual download pdf (Page 12)

13. Attach a Seat Arm (26) to the Sliding Seat Frame

(8) with two M6 x 35mm Bolts (83) and two M6

Nylon Locknuts (102).

Repeat with the other Seat Arm (26).

15. Lubricate wo M10 x 80mm Bolts (110) with

grease. Attach the two Leg Press Brackets (16) to

the Press Arms (13, 14) with the Bolts and two

M10 Nylon Locknuts (101). Do not tighten the

Locknuts yet. Make sure the warining decal is

in the location shown.

14. Press a 50mm Thick Angled Cap (109) into the

top of the Rear Press Arm (13). Press a 50mm

Angled Cap (108) into the top of the Front Press

Arm (14).

Lubricate an M10 x 77mm Bolt (106) with grease.

Attach the Rear Press Arm (13), which has a hole

in the lower area, to the Leg Press Base (3) with

the Bolt and an M10 Nylon Locknut (101). Do not

overtighten the Locknut; the Press Arm must

be able to pivot easily.

Attach the Front Press Arm (14) to the Leg

Press Base (3) in the same manner.

102

109

108

106

Hole

101

110

Lubricate

Warning

Decal

101

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 40 41

No comments

Weider Club C4800 User Manual Page 12