Weider Club C4800 User Manual download pdf (Page 10)

7. Press a 50mm x 75mm Inner Cap (46) into the

Top Frame (9).

Slide the welded tubes on the Top Frame (9) over

the upper ends of the Weight Guides (18, 19).

Attach the Top Frame (9) to the Butterfly Upright

(2) with two M10 x 75mm Bolts (82) and two M10

Nylon Locknuts (101). Do not tighten the

Locknuts yet.

Attach the Top Frame (9) to the Weight Guides

(18, 19) with four M10 x 45mm Bolts (51) and

four M10 Nylon Locknuts (101). Do not tighten

the Locknuts yet.

9. Attach the Seat Adjustment Frame (4) to the Leg

Press Base (3) with four M10 x 65mm Carriage

Bolts (88) and four M10 Nylon Locknuts (101).

Tighten the M10 Nylon Locknuts (101) used in

steps 1–3 and 7–9.

8. Press a 50mm Thick Square Inner Cap (47) into

the Sliding Seat Frame (8). Press a 50mm Square

Inner Cap (45) into the indicated end of the Seat

Adjustment Frame (4). Press the Metal Plate (44)

and the 50mm Angled Outer Cap (43) onto the

other end of the Seat Adjustment Frame.

Tighten a “T”-handle (59) into the Sliding Seat

Frame (8). Turn the “T”-handle counterclockwise

to loosen it. Pull out the handle as far as possible

and slide the Seat Adjustment Frame (4) into the

Sliding Seat Frame. Release the handle and let it

engage one of the adjustment holes in the Seat

Adjustment Frame. Then, tighten the handle.

101

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 40 41

No comments

Weider Club C4800 User Manual Page 10