Weider WESY19511 User Manual download pdf (Page 7)

7

5. Press the Weight Tube Bumper (64) into the end

of the Weight Tube (63). Insert the Weight Tube

into the stack of Weights (25). Be sure that the

pins on the Weight Tube are resting in the pin

grooves in the upper Weight.

Lubricate the insides of the holes in the Top

Weight (76). Set the Top Weight onto the stack of

Weights (25).

Insert both Weight Guides (62) into the stack of

Weights (25). Be sure that the holes in the

Weight Guides are at the top, as shown.

6. Attach the upper ends of the Weight Guides (62)

to the Top Frame (55) with the M8 x 150mm Bolt

(60), two 13mm x 19mm Spacers (61), and an

M8 Nylon Locknut (3).

Be sure that the Pulley Bracket (20) is in front

of the right Weight Guide (62) as shown.

7

5

6

55

76

63

64

25

62

Lubricate

Pin Groove

60

20

62

3

Tube

Welded

Spacers

17

Lubricate

15

21

4

75

59

61

Holes

Arm Assembly

7. Press a 25mm x 22mm Plastic Bushing (75) onto

each welded spacer on the Press Frame (17).

Slide the Press Frame into place on the Base (4).

Note: This will be a tight fit. The Plastic

Bushings should fit onto each end of the indi-

cated tube in the Base. Be sure that the 90mm

Pulley (15) is on the indicated side.

Lubricate the M10 x 195mm Bolt (59). Attach the

Press Frame (17) to the Base (4) with the Bolt

and an M10 Nylon Locknut (21). Do not over-

tighten the Locknut; the Press Frame must be

able to pivot freely.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comments to this Manuals

No comments