Weider WESY19511 User Manual download pdf (Page 12)

22. Route the Short Cable (58) around the 90mm

Pulley (15) attached to the upper hole in the Front

Upright (42). See the inset drawing. Be sure

that the Cable Trap (66) is turned to hold the

Cable in place and that the Cable is routed

around the Pulley as shown. Tighten the M10

Nylon Locknut (21) and the M10 x 95mm Bolt

(71).

23. Attach the end of the Short Cable (58) to the

Long “U”-Bracket (57) with an M8 Nylon Locknut

(3) and an M8 Washer (8). See the inset draw-

ing. Do not overtighten the Nylon Locknut; it

should be threaded onto the end of the Cable

so only a couple of threads are showing

above the nut.

Inset shows view

from other side

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 27 28

No comments

Weider WESY19511 User Manual Page 12