Weider 2980 X User Manual download pdf (Page 8)

3. Attach the Front Leg (7) to the Base (1) with the

two M8 x 63mm Carriage Bolts (64) and two M8

Nylon Locknuts (58). Do not tighten the Nylon

ocknuts yet.

ttach the Leg Bumper (60) to the Front Leg (7)

with an M4 x 20mm Self-tapping Screw (69) and

an M4 Washer (33). Make sure that the end of

the Leg Bumper is pointing upward.

4. Attach the Seat Frame (6) to the Upright (3) with

two M8 x 65mm Bolts (68), two M8 Washers (59),

and two M8 Nylon Locknuts (58). Do not tighten

the Nylon Locknuts yet.

Attach the Seat Frame (6) to the Front Leg (7)

in the same way.

5. Slide the two Weight Bumpers (27) onto the

Weight Guides (21). Orient the six Weights (22)

with the pin holes on the bottom as shown. Slide

the Weights onto the Weight Guides.

Insert the Weight Selector Cap (23) into the

Weight Selector (24). Insert the Weight Selector

into the six Weights (22). Make sure that the pin

on the Weight Selector is oriented as shown.

Apply some of the included grease to the indicat-

ed holes in the Top Weight (25). Slide the Top

Weight onto the Weight Guides (21).

Hole

Grease

Upward

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

No comments

Weider 2980 X User Manual Page 8