Weider 141 User Manual download pdf (Page 21)

37. Wrap the Arm Cable (145) over a “V”-pulley (75).

Attach the “V”-pulley, a Large Cable Trap (77),

nd two Full Pulley Guards (76) to the other side

of the bracket on the Center Upright (13) with an

10 x 60mm Bolt (133) and an M10 Nylon

Locknut (153). Make sure that the Cable Trap is

oriented to hold the Cable in the groove of the

“V”-pulley.

38. Grease an M8 x 22mm Shoulder Bolt (143).

Attach the Arm Cable (145) to the Right

Adjustment Bracket (24) with the Shoulder Bolt

and an M8 Nylon Locknut (170). See the inset

drawing. Make sure that the flat edge of the

cable is against the Adjustment Bracket. Do

not overtighten the Shoulder Bolt; the Cable

must pivot easily.

39. Identify the High Cable (81). Feed the Cable

under the indicated rod into the right Swivel

Bracket (31). Continue feeding the Cable into the

Top Frame (17), and then pull the end of the

Cable out of the indicated slot in the

op Frame.

Wrap the High Cable (81) over a Large Pulley

(165). Attach the Large Pulley to the Swivel

Bracket (31) with an M10 x 55mm Bolt (127), two

M10 Washers (148), two M10 x 6.5mm Spacers

(151), and an M10 Nylon Locknut (153).

127

148

165

151

Rod

153

Ball

133

145

153

143

Grease

151

148

Slot

170

143

145

170

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

Comments to this Manuals

No comments

Weider 141 User Manual Page 21

Comments to this Manuals

Related products and manuals for Fitness, gymnastics & weight training Weider 141