Weider 141 User Manual download pdf (Page 8)

3. Attach the Front Leg (3) to the Bench Frame (1)

with two M10 x 100mm Screws (117) and two

10 Washers (148). T

ighten the Screws used in

steps 1 and 3.

4. Attach the Backrest (32) to the Backrest Frame

(8) with four M6 x 20mm Screws (122).

148

117

122

5. Attach the Backrest Support Spacer (51) between

the two Backrest Supports (7) with an M10 x

165mm Bolt (123), two M10 Washers (148), and

an M10 Nylon Locknut (153).

Do not tighten the

Nylon Locknut yet.

Orient the Backrest Supports (7) so that the

Backrest Support Spacer (51) is closer to the

upper ends.

Apply some of the included grease to an M10 x

165mm Bolt (123). Attach the Backrest Frame (8)

and two Backrest Bushings (48) between the

Backrest Supports with the Bolt, two M10

ashers (148), and an M10 Nylon Locknut (153).

Do not overtighten the Nylon Locknut; the

Backrest Supports must pivot easily

148

153

148

123

Upper

Ends

Grease

Opening

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 43 44

No comments

Weider 141 User Manual Page 8