Weider WESY86300 User Manual download pdf (Page 5)

ASSEMBLY

1. Before beginning assembly, be sure that

you have read and understand the infor-

mation in the box above.

Locate and open the parts bags labeled

“FRAME ASSEMBLY BAG ONE” and

“FRAME ASSEMBLY BAG TWO.”

Press two 2” Square Outer Caps (58) onto

the Weight Base (14) in the indicated loca-

tions. Press a 2” Square Inner Cap (56) into

the end of the Weight Base.

Insert four 5/16” x 2 1/2” Carriage Bolts (49)

up through the Press Base (13). Insert two

5/16” x 2 1/2” Carriage Bolts up through the

Weight Base (14).

Attach the Press Base (13) to the Weight

Base (14) with two 5/16” x 2 3/4” Bolts (55),

two 5/16” Washers (20), and two 5/16” Nylon

Locknuts (40). Do not tighten the Nylon

Locknuts yet.

FRAME ASSEMBLY

Before beginning assembly, carefully read the

following information and instructions:

• Place all parts in a cleared area and remove the

packing materials; do not dispose of the packing

materials until assembly is completed.

• Assembly is divided into four stages: 1) frame

assembly, 2) press and butterfly arm assembly,

3) cable and pulley assembly, and 4) seat and

backrest assembly. The hardware for each stage

is packaged separately.

• Wait until you begin each assembly stage to open

the parts bag labeled for that assembly stage.

• For help identifying the small parts used in

assembly, use the PART IDENTIFICATION

CHART located in the center of this manual.

Note: Some small parts may have been pre-

attached for shipping. If a part is not in the parts

bag, check to see if it has been pre-attached.

• As you assemble this product, be sure that all

parts are oriented as shown in the drawings.

• Tighten all parts as you assemble them, unless

instructed to do otherwise.

THE FOLLOWING TOOLS (NOT INCLUDED) ARE

REQUIRED FOR ASSEMBLY:

• Two (2) adjustable wrenches

• One (1) standard screwdriver

• One (1) phillips screwdriver

• One (1) rubber mallet

• Lubricant, such as grease or petroleum jelly,

and soapy water will also be needed.

Assembly will be more convenient if you have the

following tools: A socket set, a set of open-end or

closed-end wrenches, or a set of ratchet wrenches.

1 2 3 4 5 6 7 8 9 10 ... 34 35

Comments to this Manuals

No comments

Weider WESY86300 User Manual Page 5

Comments to this Manuals

Related products and manuals for Sports and recreation Weider WESY86300