Weider WESY2952 User Manual download pdf (Page 5)

26

5

Before beginning assembly, carefully read the

following information and instructions:

• Assembly requires two people.

• Place all parts in a cleared area and remove the

packing materials. Do not dispose of the packing

materials until assembly is completed.

• Tighten all parts as you assemble them, unless

instructed to do otherwise.

• As you assemble the weight system, make sure

all parts are oriented as shown in the drawings.

• For help identifying small parts, use the PART

IDENTIFICATION CHART.

An Allen wrench (included) and the following

tools (not included) are required for assembly:

• two adjustable wrenches

• one rubber mallet

• one standard screwdriver

• one Phillips screwdriver

• lubricant, such as grease or petroleum jelly,

and soapy water.

Assembly will be more convenient if you have a

socket set, a set of open-end or closed-end

wrenches, or a set of ratchet wrenches.

Make Things Easier for Yourself

Everything in this manual is designed to ensure

that the weight system can be assembled suc-

cessfully by anyone. However, it is important to

realize that the versatile weight system has

many parts and that the assembly process will

take time. Most people find that by setting aside

plenty of time, assembly will go smoothly.

ASSEMBLY

1

33

33

60

67

68

98

1

71

60

67

28

26

26

57

57

1. Before beginning, make sure that you under-

stand the information in the box above.

Attach the Base Cap (28) to the Right Base (1)

with two #8 x 3/4” Screws (68).

Attach the Center Base (67) to the Right Base (1)

with two 5/16” x 2 3/4” Bolts (60), two 5/16”

Washers (26), and two 5/16” Nylon Locknuts (71).

Insert four 5/16” x 2 1/2” Carriage Bolts (57) up

into the Right Base (1). Tape the bolt heads in

place.

FRAME ASSEMBLY

2. Press two 2” Square Inner Caps (33) into the

ends of the Left Base (2). Attach the Rubber

Bumper (98) to the Left Base with a #8 x 3/4”

Screw (68).

Insert four 5/16” x 2 1/2” Carriage Bolts (57) up

into the Left Base (2). Tape the bolt heads in

place.

Attach the Left Base (2) to the Right Base (1) and

the Center Base (67) with three 5/16” x 2 3/4”

Bolts (60), three 5/16” Washers (26), and three

5/16” Nylon Locknuts (71).

2

1

2

60

71

57

68

26

57

1 2 3 4 5 6 7 8 9 10 ... 33 34

Comments to this Manuals

No comments